{"id":631,"date":"2023-09-05T10:03:34","date_gmt":"2023-09-05T10:03:34","guid":{"rendered":"https:\/\/function3d.xyz\/?p=631"},"modified":"2023-09-05T17:51:01","modified_gmt":"2023-09-05T17:51:01","slug":"faqs","status":"publish","type":"post","link":"https:\/\/shop.function3d.xyz\/en\/faqs\/","title":{"rendered":"FAQs"},"content":{"rendered":"
\n\n\t\n\n\n\n\n\n\n\t\n\t\n\t
\n\n\t\t
\n\t\n\t
\n\t\t\n\t\t

\n\t\t\tGeneral\t\t\t\t\t<\/h3>\n\n\t\t\t\n\t<\/div>\n\t\n\t
\n
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhy do you buy bottles when there are millions in landfills?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t

I don’t buy bottles, I buy water for drinking and cooking<\/p>\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhat 3d modeling software you use?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

onshape.com<\/a>, like fusion360 but works on Linux because it is browser-based<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tYou should print a bottle just for LOLs\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

As soon as I find a way to do it in a useful way, I will do it<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhat is the electricity cost of 3D printing and making filament?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

Ordinary 3D printers<\/strong> do not use much electricity, only about\u00a050-150 Watts<\/strong>\u00a0while printing, PETALOT<\/strong> use 60 Watts<\/strong> maximum.<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tPET plastic is notoriously known for warping. How you managed to deal with that?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

BL sensor + hairspray + 60\u00b0C<\/span><\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhere is your linktree?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t

https:\/\/linktr.ee\/function.3d<\/a><\/p>\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div><\/div>\n\n<\/div>\n
\n\t\n\t
\n\t\t\n\t\t

\n\t\t\tMy 3D printer\t\t\t\t\t<\/h3>\n\n\t\t\t\n\t<\/div>\n\t\n\t
\n
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhat is your 3D printer?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

Creality Ender 3, I bought it in December 2018 on aliexpress(order)<\/a>, it cost me 191\u20ac with glass bed and 2 Kg of PLA as extras<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhat modifications did you make to your 3D printer?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

https:\/\/www.tiktok.com\/@function.3d\/video\/7128842620071054597?is_copy_url=1&is_from_webapp=v1<\/a>
Today I use Mainsail<\/a> instead of Octoprint<\/a>, maybe tomorrow Fluidd<\/a> or I go back to Octoprint<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div><\/div>\n\n<\/div>\n
\n\t\n\t
\n\t\t\n\t\t

\n\t\t\tPETALOT\t\t\t\t\t<\/h3>\n\n\t\t\t\n\t<\/div>\n\t\n\t
\n
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tGenius idea?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

The idea is great but it’s not new, it’s not mine and it’s not easy to implement. The designs, plans, electronics and firmware that I share are my designs based and inspired by many other projects on the internet, the only right I reserve on my designs is the commercial use and attribution, you can distribute, mix, adjust and build from my designs as long as it is for personal use<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tCan we see DIY tutorial?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

Tiktok playlist<\/a><\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhere can I find the blueprints?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

https:\/\/github.com\/function3d\/petalot<\/a><\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tAt what width do you cut the plastic strip from the bottle?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

The width of the cut depends on the thickness of the bottle wall, as a general rule:
Thickness Width<\/strong>
0.2mm 10mm
0.25mm 9mm
0.3mm 8mm
0.35mm 7mm.<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tHow do you make the strip round?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

With heat (220\u00baC) and force the PET plastic strip is bent into a straw shape, the plastic does not melt at any time when the filament is being made, only when 3D printing is when it melts at 255\u00baC.<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tWhat is the temperature of the heating block and the speed at which you pull the filament?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t

220\u00baC and 20cm\/min<\/p>\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tHow do you get such consisten extrusion?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t

The consistency of the filament depends on the consistency of the width of the plastic strip, the crucial moment on which the consistency of the filament depends is just during the cutting of the plastic strip from the bottle<\/p>\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tHow do you get such clean results with bottle filament?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t

I clean the plastic in all parts of the process conscientiously, before counting the bottle in strip I clean it with water and soap and with solvent if it has glue, then I keep the plastic strip clean of dust with cleaning filters even during the 3D printing.<\/p>\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tDid it smell when you 3D print with PET plastic?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

PET fumes are, like PETG, harmless and odorless, also PET plastic is food safe<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\thow powerful power supply you use?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

I use an ATX PC power supply, but 12V 60W should be enough.<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\thow many time and how many bottle do you need to make 1 kg?\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

<\/p>\r\n

 <\/p>\r\n

From this premium 1.5L water bottle I get approx 25g or 10m of final filament, this is because these bottles have very little waste and a wall thickness of 0.35mm which allows me to cut them to 7mm width, do not expect to get more than 5 meters of filament from an ordinary 1.5L water bottle. Also these water bottles are not consumed by me, a neighbor brings me a few each week. I buy 8L bottles for drinking and cooking which give me 27m or 66g each.<\/p>\r\n

The speed is between 16 to 20 cm per minute.<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div>
\n\n\t\t\n\t
\n\t\n\t\n\n\t\t
\n\t\t\ta<\/span>\n\t\t<\/div>\n\n\t\t
\n\n\t\t\t

\n\t\t\t\tbei 25 Cent Pfand in Deutschland wird sich das nicht lohnen\t\t\t<\/h4>\n\n\t\t<\/div>\n\n\t\t
<\/div>\n\n\t<\/a>\n\t\n<\/div>\n\t\n\t
\n\n\t\t\n\t\t\t\n\t\t\n\t\t\t
\n\t\r\n

I get 25g of filament from a 1.5L water bottle and 25g of filament cost on Amazon about 70cent<\/p>\r\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t\t\t

\n\t\n\t\n\t\t\n\t\tPermalink\t\t\t\n\t<\/a>\n\n<\/div>\n\t\t\n\t\t\t\n\t\t\n\t\t\t\n\t\t\n\t<\/div>\n\n<\/div><\/div>\n\n<\/div>\n\n\t<\/div>\n\n\t\n<\/div>\n\n\n
<\/div>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":430,"comment_status":"closed","ping_status":"open","sticky":true,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","_jetpack_memberships_contains_paid_content":false,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[50],"tags":[],"class_list":["post-631","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-help"],"jetpack_featured_media_url":"https:\/\/shop.function3d.xyz\/wp-content\/uploads\/2022\/09\/IMG20230407172746-scaled-e1691436203537.jpg","jetpack_shortlink":"https:\/\/wp.me\/se3sSh-faqs","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/posts\/631","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/comments?post=631"}],"version-history":[{"count":5,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/posts\/631\/revisions"}],"predecessor-version":[{"id":644,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/posts\/631\/revisions\/644"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/media\/430"}],"wp:attachment":[{"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/media?parent=631"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/categories?post=631"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/shop.function3d.xyz\/en\/wp-json\/wp\/v2\/tags?post=631"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}